1 Introduction

The MfgTool is a manufacturing tool from Freescale that runs under Windows. It is designed to program firmware to i.MX boards for mass production. Boards are connected via USB and execute the USB/UART (Serial downloader) mode.

Bluetechnix added additional profiles to this tool in order to be usable with our i.MX53 modules.

2 Download

  •              MfgTool release 1.6.2.042 by Freescale

    • Support for CM-i.MX53 Consumer + Industrial, Qseven-i.MX537 modules
    • Target running Linux BSP with Bluetechnix patchset V1.4
    • Download
      here
  • (DEPRECATED) MfgTool release 1.6.2.032 by Freescale

    • Support for CM-i.MX53 Consumer
    • Target running Linux BSP with Bluetechnix patchset V1.2
    • Download
      here

You may download the original ZIP file from the Freescale web site - open the Programmers (Flash, etc.) menu!

3 Instructions

  • Connect the boards' USB-OTG port to a Windows PC. Select USB/UART (Serial Downloader) boot mode on the boards, and power up the boards. The first time you connect, you have to install a Windows device driver. You can find it in the ZIP file, folder
    Drivers. If you have successful installed the driver, the boards shows up as
    Freescale i.MX53 USB BulkIO Device in the device manager.
  • Start MfgTool.exe. Switch on or reset your boards and click on Scan devices. In the field A to D, your boards will show up as
    Freescale i.MX53 USB BulkIO Device.
  • In the Profile: drop-down box, select the correct profile for your module
    • cmimx53 consumer
    • cmimx53 industrial
    • qsevenimx537
  • Select Options-->Configuration...
    from the menu. There may be several options for the firmware update, choose the desired one as shown on the image below.

    • CM-i.MX53 Consumer/Industrial

      • SPI+NAND: Programs the boot loader and the kernel image to SPI flash, the root file system to NAND flash; for SPI flash boot mode.
      • NAND: Programs everything to NAND flash; for NAND boot mode.
    • Qseven-i.MX537
      • SPI+NAND: Programs the boot loader to SPI flash, the kernel image to SPI and NAND flash, and the root file system to NAND flash only; for SPI flash boot mode.
  • Leave the menu and click the green Start button. Now, the firmware update is in progress.
  • A green progress bar indicates success.
  • Note that boards may be disconnected and reconnected individually, the tool will monitor them and start a new firmware update each time a new board is connected.

MfgTool (i.MX53)使用的更多相关文章

  1. Mfgtool

    For bootstrap mode, it refers to the communcation between the host and ROM codes through serial down ...

  2. imx:MfgTool

    MfgTool使用方法: MfgTool很妖,写进去的img的名字一定要符合配置文件里面的命名标准. 具体要参见:        MFG_TOOL\Profiles\Linux\OS Firmware ...

  3. 痞子衡嵌入式:飞思卡尔i.MX RT系列MCU启动那些事(3)- Serial Downloader模式(sdphost/MfgTool)

    大家好,我是痞子衡,是正经搞技术的痞子.今天痞子衡给大家介绍的是飞思卡尔i.MX RT系列MCU的Serial Downloader模式. 在上一篇文章 Boot配置(BOOT Pin, eFUSE) ...

  4. imx6 MfgTool分析

    解析freescale的MfgTool中的脚本,了解imx6, android系统的分区情况. 配置文件 1. cfg.ini [profiles] chip = MX6DL Linux Update ...

  5. i.mx53开发的一些问题

    i.mx53开发的一些问题 转载于此:http://blog.csdn.net/shell_albert/article/details/8242288   原来i.mx53上4GB的Nand Fla ...

  6. 制作SD更新系统时和用mfgtool工具烧录时,文件如何替换?

    制作SD更新系统时和用mfgtool工具烧录时,文件如何替换? 答:制作SD更新系统时,请按照需求选择不同mfgimages-myd*文件夹.每个文件夹里面有一个Manifest文件, 里面规定了ub ...

  7. 对freescale的mfgtool的ucl2.xml的理解

    转载于此:http://blog.csdn.net/bugouyonggan/article/details/8664898 对于Freescale MFG编程工具控制文件ucl2.xml的分析 为了 ...

  8. 开源的EtherCAT Master简介

    EtherCAT的主站开发是基于EtherCAT机器人控制系统的开发中非常重要的环节.目前常见开源的主站代码为的RT-LAB开发的SOEM (Simple OpenSource EtherCAT Ma ...

  9. Yocto开发笔记之《U-boot启动内核流程》(QQ交流群:519230208)

    QQ群:519230208,为避免广告骚扰,申请时请注明 “开发者” 字样 ======================================================== 执行命令 ...

随机推荐

  1. <转>卷积神经网络是如何学习到平移不变的特征

    After some thought, I do not believe that pooling operations are responsible for the translation inv ...

  2. Apache Commons 工具集

    一.Commons BeanUtils http://jakarta.apache.org/commons/beanutils/index.html 说明:针对Bean的一个工具集.由于Bean往往是 ...

  3. bootstrap学习记录(慕课网教程)

    1.当主标题下需要副标题时可在h中嵌套small<h1>nihao<small>a</samll></h1> 2.当某一段落需要突出显示时可添加lead ...

  4. 第一章 USB Type C的基本原理

    图 1: USB Type C接头外形 USB Type C(简称USB-C)的基本特性: 1. 接口插座的尺寸与原来的Micro USB规格一样小,约为8.3mm X 2.5mm 2. 可承受1万次 ...

  5. 最后的配置部分:LNMP+Tomcat

    Nginx与PHP部分 mkdir /www/php -p echo -e "<?php\n\tphpinfo();\n?>" > /www/php/index. ...

  6. 基于Verilog HDL 的数字电压表设计

    本次实验是在“基于Verilog HDL的ADC0809CCN数据采样”实验上进一步改进,利用ADC0809采集到的8位数据,进行BCD编码,以供查表方式相加进行显示,本次实验用三位数码管. ADC0 ...

  7. 从源码分析java.lang.String.isEmpty()

    今天在写代码的时候用到了java.lang.String.isEmpty()的这个方法,之前也用过,今天突发奇想,就看了看源码,了解了解它的实现方法,总结出来,大家可以交流交流. 通常情况下,我们使用 ...

  8. 201521123074 《Java程序设计》第14周学习总结

    1. 本周学习总结 1.1 以你喜欢的方式(思维导图或其他)归纳总结多数据库相关内容. 2. 书面作业 Q1. MySQL数据库基本操作 建立数据库,将自己的姓名.学号作为一条记录插入.(截图,需出现 ...

  9. (四)—性能测试工具curl-loader(linux)

    curl-loader介绍 curl-loader(也被称为"omes-NIK"和"davilka")是一个开源的C语言编写的工具,模拟应用负载和成千上万的几十 ...

  10. 【学习总结】GirlsInAI ML-diary day-14-function函数

    [学习总结]GirlsInAI ML-diary 总 原博github链接-day14 认识函数function 函数相当于一个固定的公式,一个映射.有输入,有输出. 1-python内置函数 max ...