This article mainly introduces the process of Memcached, libevent structure of the main thread and worker thread based on the processing of the connection state of mutual conversion (not involving data access operations), the main business logic is the drive_machine. State transition process does not involve all the state, at the same time, because of his ability, some state transition may be wrong, also please predecessors. Conversion conditions: TCP, ASCII protocol. (not including conn_swallow, binary protocols will use this state)

1 Overview

First introduces the connection, connection is connected to the conn Memcached definition of their own. All state, drive_machine () is the main conversion of the state of operation:

enum conn_states { conn_listening, /**<the socket which listens for connections /The main thread waits on the link*/ conn_new_cmd, /**<Prepare connection for next command /workerThreads are waiting for the command*/ conn_waiting, /**<waiting for a readable socket /workerThe thread is waitingsdfA readable information*/ conn_read, /**<reading in a command line /workerThread the read command*/ conn_parse_cmd, /**<try to parse a command from the input buffer /wokerThread*/ conn_write, /**<writing out a simple response /workerThread*/ conn_nread, /**<reading in a fixed number of bytes /workerBecause the command finished thread, Continue to read / conn_swallow, /**<swallowing unnecessary bytes w/o storing /worker thread, ASCIIThe agreement is not involved in this state*/ conn_closing, /**<closing this connection */ conn_mwrite, /**<writing out many items sequentially /workerThread, The response content to * / conn_max_state /**<Max state value (used for assertion) / marker for conn_states boundary, Beyond that states is wrong*/ };

In the Memcached.c (main), the main thread and worker thread to complete the necessary initialization, bind the corresponding libevent events, then the main thread monitor bind monitoring ports, do a good job recycling for formal. Below is the total conversion connection state graph.

2 receive connections are distributed to the worker thread

  1. The main thread initialization, connecting into conn_listening state, waiting for the connection.
  2. When there is a connection, the main thread through the dispatch_conn_new () to pipeline writes characters C, connect the distributed to a worker thread worker thread connection, receive, enter the conn_new_cmd wait state.

3 data read

  1. Conn_new_cmd is waiting for the new connection, when the connection is written, if the current request too many, may cause starvation on other worker threads, change event type is EV_WRITE, exit.
  2. If the connection is not much, and have not read data, shows the pending command, a trip to the conn_parse_cmd, in order to continue processing the command.
  3. If the connection is not much, and is a new connection, showed no unread data, is connected into the conn_waiting state waiting for data (command).
  4. conn_waiting, Threads are waiting for subsequent data connection, if a data set to the current socket FD for reading EV_READ, ensure the following content of reading. In conn_read, call try_read_network () to read from socket FD, if no data is returned to conn_waiting, if the data is entered into the conn_parse_cmd, waiting for processing command.

The 4 command parsing

  1. After entering the conn_parse_cmd, received the order, call try_read_command () to analyze the user command, this analysis of the ASCII protocol commands, which can call process_command () to handle user command.
  2. According to the user's command, will call for different types of orders. Such as set, replace, update_command); incr (command corresponds, decr corresponds to process_arithmetic_command (gets); process_get_command (corresponding) etc.
  3. If the update type command, also need to read the updated content, enter the conn_nread state.
  4. Other types of command has to wait for the results.

The 5 command returns

  1. There will be in response to a command execution, if the command only need feedback an execution results, through the out_string () function to output the results, enter conn_write.
  2. If the get command, you need to print the contents of get, into the conn_mwrite stage.
  3. The case statement conn_write without break, so the normal print will be going to conn_mwrite.

The 6 result output

  1. Conn_mwrite, call transmit () the response results are output. Transmit () to check the current state of the writing.
  2. If the data is finished, then change the state of waiting for the new command is conn_new_cmd.
  3. If not finished, then continue to wait, until finished.

7 Summary

Above is the conversion and connection status, analysis is not in place or wrong place please. In general, feel the Memcached application of libevent writes very standard, follow up with libevent, but also can learn from Memcached to a lot of knowledge.

reference from:http://www.programering.com/a/MzM3MjMwATU.html

Memcached source code analysis -- Analysis of change of state--reference的更多相关文章

  1. Memcached source code analysis (threading model)--reference

    Look under the start memcahced threading process memcached multi-threaded mainly by instantiating mu ...

  2. LIRE教程之源码分析 | LIRE Tutorial of Analysis of the Source Code

    LIRE教程之源码分析 |LIRE Tutorial of Analysis of the Source Code 最近在做地理图像识别和检索的研究,发现了一个很好用的框架LIRE,遂研究了一通.网上 ...

  3. Eclipse Error: The refactoring does not change any source code

    最近在做android项目的过程中遇到这样一个问题,新增一个activity的时候添加不成,eclipse提示The refactoring does not change any source co ...

  4. Steps of source code change to executable application

    程序运行的整个过程,学习一下 源代码 (source code) → 预处理器 (preprocessor) → 编译器 (compiler) → 汇编程序 (assembler) → 目标代码 (o ...

  5. [转]Native Java Bytecode Debugging without Source Code

    link from:http://www.crowdstrike.com/blog/native-java-bytecode-debugging-without-source-code/index.h ...

  6. How to compile and install Snort from source code on Ubuntu

    http://www.tuicool.com/articles/v6j2Ab Snort is by far the most popular open-source network intrusio ...

  7. How to build the Robotics Library from source code on Windows

    The Robotics Library is an open source C++ library for robot kinematics, motion planning and control ...

  8. Artistic Style 3.1 A Free, Fast, and Small Automatic Formatter for C, C++, C++/CLI, Objective‑C, C#, and Java Source Code

    Artistic Style - Index http://astyle.sourceforge.net/ Artistic Style 3.1 A Free, Fast, and Small Aut ...

  9. Tree - Decision Tree with sklearn source code

    After talking about Information theory, now let's come to one of its application - Decision Tree! No ...

随机推荐

  1. IOS第一天-新浪微博 - 框架的搭建

    *************HWAppDelegate.m - (BOOL)application:(UIApplication *)application didFinishLaunchingWith ...

  2. 线性探测再散列 建立HASH表

    根据数据元素的关键字和哈希函数建立哈希表并初始化哈希表,用开放定址法处理冲突,按屏幕输出的功能表选择所需的功能实现用哈希表对数据元素的插入,显示,查找,删除. 初始化哈希表时把elem[MAXSIZE ...

  3. 在eclipse中的tomcat内存设置

    设置步骤如下: 1.点击eclipse上的debug图标旁边的下拉箭头 2.然后选择Run Configurations, 3.系统弹出设置tomcat配置页面,在Argument中末尾添加参数中的V ...

  4. ASP.NET页面错误处理

    ASP.NET 提供三种用于在出现错误时捕获和响应错误的主要方法:Page_Error 事件.Application_Error 事件以及应用程序配置文件 (Web.config). 这里主要介绍Ap ...

  5. Servlet程序开发--Servlet简介

    使用java语言开发的服务器端程序,可以生成动态web页,运行在服务器端,由服务器调用执行,是一种按照servlet标准开发的类. 先有servlet,后有jsp,jsp骨子里依然是servlet. ...

  6. 委托(2).net 1.x中的委托

    上一篇已经演示了使用委托实现一个多语言问候的程序,这一篇文章来总结一下在.net 1.x中委托的使用方法. 既然委托是一个类型(class),那么它就要经历像类一个先声明,然后new一个对象,最后调用 ...

  7. CCNA笔记

    *****************交换机********************一:交换机:具有多个交换端口,专用集成电路技术使得交换器以线路速率在所有的端口并行转发数据,有很高的总体吞吐率;虚拟网V ...

  8. Axis2之wsdl2java工具

    本章主要介绍axis2的wsdl2java工具的使用. Axis2提供了一个wsdl2java命令可以根据WSDL文件自动产生调用WebService的代码.wsdl2java命令可以在<Axi ...

  9. ASP 基础一

    ASP是什么? •ASP代表Active Server Pages(动态服务器页面) •需在IIS中运行的程序 我自己的理解就是UI和逻辑代码同在一个页面中,而缺点就是不易维护.code-Behind ...

  10. memset和memcpy函数、atoi函数

    memset void *memset(void *s,int c,size_t n) 总的作用:将已开辟内存空间 s 的首 n 个字节的值设为值 c.如下: // 1.将已开辟内存空间s的首n个字节 ...