Linux下命令行安装weblogic10.3.6

一、安装前准备工作:

1、创建用户useradd weblogic;创建用户成功linux系统会自动创建一个和用户名相同的分组,并将该用户分到改组中。并会在/home路径下创建一个和用户名相同的路径,比如我们创建的weblogic。

注:当然,你也可以通过groupadd -g GID groupname(GID代表创建组的ID,一般大于500),然后useradd –d userhome –g GID username(userhome 代表用户的主目录,GID 为前一步创建的组ID)创建用户并将用户分到相应的组里面。

2、卸载掉linux系统自带的jdk,安装我们自己的jdk,建议和开发过程中用到的jdk版本一致。

注:jdk的卸载和安装参见:http://mwshitou.blog.163.com/blog/static/233167114201411171655109/

二、开始安装:
a.?创建weblogic用户组.?

useradd weblogic
passwd weblogic

更改jdk版本

2、进入安装目录
#cd /home
#cp jdk-7u76-linux-x64.rpm /usr/local
#cd /usr/local
给所有用户添加可执行的权限

#rpm -ivh jdk-7u76-linux-x64.rpm

设置环境变量

#vi /etc/profile

打开后,在文档最下方加上以下环境变量配置代码:

export JAVA_HOME=/usr/java/jdk1.6.0_45
export CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar
export PATH=$JAVA_HOME/bin:$PATH

执行生效

#. /etc/profile

weblogic用户

export JAVA_HOME=/usr/java/jdk1.6.0_45

export JAVA_BIN=/usr/java/jdk1.6.0_45/bin

export PATH=$PATH:$JAVA_HOME/bin

export CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar

export JAVA_HOME JAVA_BIN PATH CLASSPATH

注意:export PATH=$JAVA_HOME/bin:$PATH,注意将$PATH放到最后。以免造成新旧版本问题。
当你已经成功把jdk1.6.0_45 安装到 /usr/java,并且配置好了系统环境变量
执行 # java -version 时就是 显示jdk1.6.0_45,是因为你的linux系统有默认的jdk;执行
cp jdk-6u7-linux-i586.bin /usr
即将jdk复制到/usr目录下,然后进入/usr目录cd /usr

执行权限

chmod +x jdk-6u45-linux-x64.bin

执行安装命令

./jdk-6u45-linux-x64.bin

1、# cd /usr/bin

# ln -s -f /usr/java/jdk1.6.0_45/jre/bin/java

# ln -s -f /usr/java/jdk1.6.0_45/bin/javac

2、接着卸载jdk-1.7.0_76,再次重新安装。卸载方法:

先查看jdk-1.7.0_76包名

#rpm -qa | grep jdk

接着执行

#rpm -e jdk-1.7.0_76-fcs

卸载完后,再次重新安装jdk-7u76-linux-x64.rpm 。

1、进入安装路径:/home/weblogic

2、将安装文件wls1036_generic.jar放入安装目录

3、chmod a+x wls1036_generic.jar  赋予安装文件可执行的权限

4、执行安装命令:java -jar filename.jar -mode=console

注:如果安装文件是.bin格式的文件,安装命令为:./wls1036_generic.bin -mode=console;(你可以不加“-mode=console”的控制台文本模式,因为在你安装时无法启动图形安装界面时它会自动的进入文本控制台模式的)

5、控制台安装:

一、安装weblogic10.3.6 64位:

-bash-4.1$ java -jar wls1036_generic.jar
Unable to instantiate GUI, defaulting to console mode.无法实例化 GUI,默认进入控制台模式。
Extracting 0%....................................................................................................100%

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Welcome:
--------

This installer will guide you through the installation of WebLogic 10.3.6.0.
Type "Next" or enter to proceed to the next prompt.  If you want to change data entered previously, type "Previous".  You may quit the installer at any time by typing "Exit".

Enter [Exit][Next]> 回车

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

"Middleware Home" = [Enter new value or use default
"/bea/weblogic/Oracle/Middleware"]

Enter new Middleware Home OR [Exit][Previous][Next]> /bea/weblogic/

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

"Middleware Home" = [/bea/weblogic]

Use above value or select another option:
    1 - Enter new Middleware Home
    2 - Change to default [/bea/weblogic/Oracle/Middleware]

Enter option number to select OR [Exit][Previous][Next]> 1

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

"Middleware Home" = [/bea/weblogic]

Enter new Middleware Home OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

Warning

/bea/weblogic directory is not empty. Proceed with installation?

Enter [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

1|Email:[]
   2|Support Password:[]
   3|Receive Security Update:[Yes]

Enter index number to select OR [Exit][Previous][Next]> 3

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

"Receive Security Update:" = [Enter new value or use default "Yes"]

Enter [Yes][No]? no

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

"Receive Security Update:" = [Enter new value or use default "Yes"]

Enter [Yes][No]? yes

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

1|Email:[]
   2|Support Password:[]
   3|Receive Security Update:[No]

Enter index number to select OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

1|Email:[]
   2|Support Password:[]
   3|Receive Security Update:[No]

Enter index number to select OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Install Type:
--------------------

Select the type of installation you wish to perform.

->1|Typical
    |  Install the following product(s) and component(s):
    | - WebLogic Server
    | - Oracle Coherence

2|Custom
    |  Choose software products and components to install and perform optional
    |configuration.

Enter index number to select OR [Exit][Previous][Next]> 2

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Products and Components:
-------------------------------

Release 10.3.6.0
    |_____WebLogic Server [1] x
    |    |_____Core Application Server [1.1] x
    |    |_____Administration Console [1.2] x
    |    |_____Configuration Wizard and Upgrade Framework [1.3] x
    |    |_____Web 2.0 HTTP Pub-Sub Server [1.4] x
    |    |_____WebLogic SCA [1.5] x
    |    |_____WebLogic JDBC Drivers [1.6] x
    |    |_____Third Party JDBC Drivers [1.7] x
    |    |_____WebLogic Server Clients [1.8] x
    |    |_____WebLogic Web Server Plugins [1.9] x
    |    |_____UDDI and Xquery Support [1.10] x
    |    |_____Server Examples [1.11]
    |    |_____Evaluation Database [1.12] x
    |_____Oracle Coherence [2] x
         |_____Coherence Product Files [2.1] x
         |_____Coherence Examples [2.2]

*Estimated size of installation: 690.2 MB

Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]> 2

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Products and Components:
-------------------------------

Release 10.3.6.0
    |_____WebLogic Server [1] x
    |    |_____Core Application Server [1.1] x
    |    |_____Administration Console [1.2] x
    |    |_____Configuration Wizard and Upgrade Framework [1.3] x
    |    |_____Web 2.0 HTTP Pub-Sub Server [1.4] x
    |    |_____WebLogic SCA [1.5] x
    |    |_____WebLogic JDBC Drivers [1.6] x
    |    |_____Third Party JDBC Drivers [1.7] x
    |    |_____WebLogic Server Clients [1.8] x
    |    |_____WebLogic Web Server Plugins [1.9] x
    |    |_____UDDI and Xquery Support [1.10] x
    |    |_____Server Examples [1.11]
    |    |_____Evaluation Database [1.12] x
    |_____Oracle Coherence [2]
         |_____Coherence Product Files [2.1]
         |_____Coherence Examples [2.2]

*Estimated size of installation: 678.7 MB

Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

JDK Selection (Any * indicates Oracle Supplied VM):
---------------------------------------------------

JDK(s) chosen will be installed.  Defaults will be used in script string-substitution if installed.

1|Add Local Jdk
   2|/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64[x]

*Estimated size of installation:  678.7 MB

Enter 1 to add or >= 2 to toggle selection  OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Product Installation Directories:
----------------------------------------

Middleware Home Directory: [/bea/weblogic]

Product Installation Directories:

"WebLogic Server" = [Enter new value or use default
"/bea/weblogic/wlserver_10.3"]

Enter new WebLogic Server OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

The following Products and JDKs will be installed:
--------------------------------------------------

WebLogic Platform 10.3.6.0
    |_____WebLogic Server
         |_____Core Application Server
         |_____Administration Console
         |_____Configuration Wizard and Upgrade Framework
         |_____Web 2.0 HTTP Pub-Sub Server
         |_____WebLogic SCA
         |_____WebLogic JDBC Drivers
         |_____Third Party JDBC Drivers
         |_____WebLogic Server Clients
         |_____WebLogic Web Server Plugins
         |_____UDDI and Xquery Support
         |_____Evaluation Database

*Estimated size of installation: 678.8 MB

Enter [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Installing files..

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]

Performing String Substitutions...

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Configuring OCM...

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]

Creating Domains...

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Installation Complete

Congratulations! Installation is complete.

Press [Enter] to continue or type [Exit]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Clean up process in progress ...

二、配置domains

cd /home/weblogic/Oracle/Middleware/wlserver_10.3/common/bin
-bash-4.1$ ./config.sh
Unable to instantiate GUI, defaulting to console mode.

<------------------- Fusion Middleware Configuration Wizard ------------------>

Welcome:
--------

Choose between creating and extending a domain. Based on your selection,
the Configuration Wizard guides you through the steps to generate a new or
extend an existing domain.

->1|Create a new WebLogic domain
    |    Create a WebLogic domain in your projects directory.

2|Extend an existing WebLogic domain
    |    Use this option to add new components to an existing domain and modify     |configuration settings.

Enter index number to select OR [Exit][Next]> 1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Domain Source:
---------------------

Select the source from which the domain will be created. You can create the
domain by selecting from the required components or by selecting from a
list of existing domain templates.

->1|Choose Weblogic Platform components
    |    You can choose the Weblogic component(s) that you want supported in
    |your domain.

2|Choose custom template
    |    Choose this option if you want to use an existing  template. This
    |could be a custom created template using the Template Builder.

Enter index number to select OR [Exit][Previous][Next]> 1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Application Template Selection:
-------------------------------

Available Templates
    |_____Basic WebLogic Server Domain - 10.3.6.0 [wlserver_10.3]x
    |_____Basic WebLogic SIP Server Domain - 10.3.6.0 [wlserver_10.3] [2]
    |_____WebLogic Advanced Web Services for JAX-RPC Extension - 10.3.6.0 [wlserver_10.3] [3]
    |_____WebLogic Advanced Web Services for JAX-WS Extension - 10.3.6.0 [wlserver_10.3] [4]

Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Edit Domain Information:
------------------------

|  Name  |    Value    |
   _|________|_____________|
   1| *Name: | base_domain |

Enter value for "Name" OR [Exit][Previous][Next]> wlyxweb

<------------------- Fusion Middleware Configuration Wizard ------------------>

Edit Domain Information:
------------------------

|  Name  |  Value  |
   _|________|_________|
   1| *Name: | wlyxweb |

Use above value or select another option:
    1 - Modify "Name"
    2 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select the target domain directory for this domain:
---------------------------------------------------

"Target Location" = [Enter new value or use default
"/bea/weblogic/user_projects/domains"]

Enter new Target Location OR [Exit][Previous][Next]> /wlyx/webapp/domains

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

|          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                                         |
   3| *Confirm user password: |                                         |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"

Enter option number to select OR [Exit][Previous][Next]> 2

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

"*User password:" = []

Enter new *User password: OR [Exit][Reset][Accept]> welwlyx50

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

|          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                *********                |
   3| *Confirm user password: |                                         |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]> 3

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

"*Confirm user password:" = []

Enter new *Confirm user password: OR [Exit][Reset][Accept]> welwlyx50

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

|          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                *********                |
   3| *Confirm user password: |                *********                |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Domain Mode Configuration:
--------------------------

Enable Development or Production Mode for this domain.

->1|Development Mode

2|Production Mode

Enter index number to select OR [Exit][Previous][Next]> 2

<------------------- Fusion Middleware Configuration Wizard ------------------>

Java SDK Selection:
-------------------

->1|N/A SDK 1.6.0_24 @ /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64
   2|Other Java SDK

Enter index number to select OR [Exit][Previous][Next]> 2

<------------------- Fusion Middleware Configuration Wizard ------------------>

Java SDK Selection:
-------------------

"JVM Directory" = []

Enter new JVM Directory OR [Exit][Previous][Next]> /bea/jdk/jdk1.6.0_37

<------------------- Fusion Middleware Configuration Wizard ------------------>

Java SDK Selection:
-------------------

"JVM Directory" = [/bea/jdk/jdk1.6.0_37]

Enter new JVM Directory OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Optional Configuration:
------------------------------

1|Administration Server [ ]
   2|Managed Servers, Clusters and Machines [ ]
   3|RDBMS Security Store [ ]

Enter index number to select OR [Exit][Previous][Next]> 1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Optional Configuration:
------------------------------

1|Administration Server [x]
   2|Managed Servers, Clusters and Machines [ ]
   3|RDBMS Security Store [ ]

Enter index number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure the Administration Server:
------------------------------------

Each WebLogic Server domain must have one Administration Server. The
Administration Server is used to perform administrative tasks.

|       Name       |        Value        |
   _|__________________|_____________________|
   1|      *Name:      |     AdminServer     |
   2| *Listen address: | All Local Addresses |
   3|   Listen port:   |        7001         |
   4| SSL listen port: |         N/A         |
   5|   SSL enabled:   |        false        |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "Listen address"
    3 - Modify "Listen port"
    4 - Modify "SSL enabled"

Enter option number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Creating Domain...

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]

**** Domain Created Successfully! ****

四:weblogic的使用

1、启动服务时无需输入用户名和密码

进入到你新建的域中:cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer

然后在该文件夹下新建名为security的文件夹:mkdir security

在刚刚新建是文件夹中新建名为boot.properties文件:vi boot.properties

然后在该文件中输入:

username=weblogic

password=weblogc123

保存后退出。重启weblogic。此时你会发觉,weblogic再也不会提示要求你输入weblogic管理台的用户名和密码了。

重启后我们来到刚刚的新建的文件夹中查看新建的文件:
cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer/security

vi boot.properties发现它的内容已经变成下面这个样子了:

#Sun Aug 04 10:23:54 CST 2013

password={AES}KWRQeICbIyJLO3zh+v+/9JeJtCzpK9ge6j4pqf9sSqA\=

username={AES}ICJVfwErXU5MOQyVPzcvVpKBkK6gI6UFlwqkkEuVgBg\=

Weblogic把它给加密了,因此只有装Weblogic的那个人即System Admin才真正知道Weblogic控制台的登录信息,这样就很安全了。

2、启动weblogic服务

cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain

./startWeblogic.sh

nohup ./startWeblogic.sh &(nohup命令:如果你正在运行一个进程,而且你觉得在退出帐户时该进程还不会结束,那么可以使用nohup命令。
该命令可以在你退出帐户/关闭终端之后继续运行相应的进程。nohup就是不挂起的意思( no hang up))

找台服务器 启动浏览器 输入 http://10.85.31.242:7001/console

输入用户名
密码

Linux下命令行安装weblogic10.3.6的更多相关文章

  1. Linux下命令行安装WebLogic 10.3.6

    1.创建用户useradd weblogic;创建用户成功linux系统会自动创建一个和用户名相同的分组,并将该用户分到改组中.并会在/home路径下创建一个和用户名相同的路径,比如我们创建的webl ...

  2. Linux下命令行安装配置android sdk

    首先, 你得有个VPN 参考以下三篇完成Android SDK的安装 https://www.digitalocean.com/community/tutorials/how-to-build-and ...

  3. Linux学习心得之 Linux下命令行Android开发环境的搭建

    作者:枫雪庭 出处:http://www.cnblogs.com/FengXueTing-px/ 欢迎转载 Linux学习心得之 Linux下命令行Android开发环境的搭建 1. 前言2. Jav ...

  4. php 运行linux命令 与 linux下命令行执行php

    1.php运行linux命令 exec函数:string exec(string command, string [array], int [return_var]);  执行函数后不输出结果,返回最 ...

  5. bc:linux下命令行计算器

    在linux下,存在一个命令行的计算器:bc.该程序一般随发行版发布. bc计算器能够执行一些基本的计算,包括+,-,×,\,%. 这些计算不经针对十进制,还可以使用二进制,八进制,十六进制,并且可以 ...

  6. linux下命令行操作快捷键及技巧

      历史相关命令 !!:执行上一条命令 !num:执行历史命令中第num条命令 !-num:执行历史命令中倒数第num条命令 !?string?:执行最近一条包含有string字符串的命令 Ctrl+ ...

  7. linux下命令行查看Memcached运行状态(shell)

    stats查看memcached状态的基本命令,通过这个命令可以看到如下信息:STAT pid 22459                             进程IDSTAT uptime 10 ...

  8. Linux下命令行显示当前全路径方法

    /etc/profile 和 ~/.bashrc 或者直接在用户的.bash_profile中添加 export PS1='[\u@\h \W]\$' 然后执行source命令

  9. VMware10中的CentOS6.5命令行安装VMwaretools工具启用windows与虚拟机中Linux系统的共享目录

    VMware10中的CentOS6.5命令行安装VMwaretools工具启用windows与虚拟机中Linux系统的共享目录 一.描述 系统描述:win7旗舰版64位系统+VMware Workst ...

随机推荐

  1. DPA 9.1.85 升级到DPA 10.0.352流程

    SolarWinds DPA的升级其实是一件非常简单的事情,这里介绍一下从DPA 9.1.95升级到 DPA 10.0.352版本的流程.为什么要升级呢? DPA给用户发的邮件已经写的非常清楚了(如下 ...

  2. 创建 Transact-SQL 作业步骤

    创建 Transact-SQL 作业步骤 在对象资源管理器中,连接到 SQL Server 数据库引擎实例,再展开该实例. 展开"SQL Server 代理",创建一个新作业或右键 ...

  3. JavaScript实现五子棋的界面设计

    五子棋的界面设计包括绘制棋盘.绘制棋子及黑白棋轮流落子. 涉及的知识点主要有canvas绘制直线.设置画笔颜色:canvas画圆.填充渐变色 1.绘制棋盘 先设定棋盘的宽.高:然后利用for循环,根据 ...

  4. mysql5.6启动占用内存很大的解决方法

    vps的内存为512M,安装好nginx,php等启动起来,mysql死活启动不起来看了日志只看到对应pid被结束了,后跟踪看发现是内存不足被killed; 调整my.cnf 参数,重新配置(系统默认 ...

  5. Spark系列—02 Spark程序牛刀小试

    一.执行第一个Spark程序 1.执行程序 我们执行一下Spark自带的一个例子,利用蒙特·卡罗算法求PI: 启动Spark集群后,可以在集群的任何一台机器上执行一下命令: /home/spark/s ...

  6. SMI接口,SMI帧结构,MDC/MDIO

    转载:http://blog.csdn.net/zyboy2000/article/details/7442464 SMI全称是串行管理接口(Serial Management Interface). ...

  7. Js中的变量

    1.什么是变量? 在JavaScript中,一种可变的量就称为变量.变量是用来临时存储数据的容器.变量是存在内存中. 2.定义变量 使用var关键字来声明变量 如下图: 3.变量名的命名规则 变量名可 ...

  8. C# 刷新当前窗体

    在有多个窗体时,刷新当前激活的窗体 在MainForm.cs中: private void m_reflashtoolStripButton1_Click(object sender, EventAr ...

  9. iOS性能优化中的离屏渲染

    GPU屏幕渲染有以下两种方式: On-Screen Rendering意为当前屏幕渲染,指的是GPU的渲染操作是在当前用于显示的屏幕缓冲区中进行. Off-Screen Rendering意为离屏渲染 ...

  10. MySQL中的类Decode用法

    SELECT DISTINCT ( CASE ' THEN '关羽' ' THEN ' 张飞' ' THEN ' 赵云' ' THEN ' 马超' ' THEN ' 黄忠' ' THEN ' 魏延' ...