{:toc}

前言

本文用最简单的方式创建FTP服务,即创建一个大家都可以访问的目录,没有涉及到各种权限限制。

创建目录

在安装配置ftp之前,首先创建一个目录,用来做ftp根目录。我创建的是/home/ftp。创建之后,给ftp赋予权限,命令如下:

#mkdir /home/ftp
#chown -R ftp /home/ftp
#chgrp -R ftp /home/ftp
#chmod -R 777 /home/ftp

安装VSFTP并设为开机启动

直接用yum安装

yum -y install vsftpd
chkconfig vsftpd on

配置vsftpd.conf文件

vsftpd.conf是最重要的配置文件

#vim /etc/vsftpd/vsftpd.conf

里面内容如下:

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
#anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES #chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
#xferlog_file=/var/log/xferlog
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES #
# You may fully customise the login banner string:
ftpd_banner=Welcome to lightnear FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES pam_service_name=vsftpd
userlist_enable=YES
userlist_deny=NO
local_root=/var/ftp
tcp_wrappers=YES use_localtime=YES

增加ftp账户

#useradd chzhao -s /sbin/nologin
#passwd chzhao

编辑user_list文件

注意,vsftpd.conf里面的userlist_deny=NO 必须设置

[root@localhost ~]# vi /etc/vsftpd/user_list
# vsftpd userlist
# If userlist_deny=NO, only allow users in this file
# If userlist_deny=YES (default), never allow users in this file, and
# do not even prompt for a password.
# Note that the default vsftpd pam config also checks /etc/vsftpd/ftpusers
# for users that are denied.
root
bin
daemon
adm
lp
sync
shutdown
halt
mail
news
uucp
operator
games
nobody
chzhao

开启服务

#service vsftpd restart

CentOS安装配置VSFTP服务器的更多相关文章

  1. CentOS 7.0安装配置Vsftp服务器步骤详解

    安装Vsftp讲过最多的就是在centos6.x版本中了,这里小编看到有朋友写了一篇非常不错的CentOS 7.0安装配置Vsftp服务器教程,下面整理分享给各位. 一.配置防火墙,开启FTP服务器需 ...

  2. asp.net core 简单部署之FTP配置(CentOS 7.0安装配置Vsftp服务器)

    配置过程原文地址:http://www.osyunwei.com/archives/9006.html 坑和结果 正确的跟着这个内容走,是靠谱的. 我自己给自己踩了个坑,请参照文章的朋友注意第七条:七 ...

  3. CentOS 7.0安装配置Vsftp服务器

    一.配置防火墙,开启FTP服务器需要的端口 CentOS 7.0默认使用的是firewall作为防火墙,这里改为iptables防火墙. 1.关闭firewall: systemctl stop fi ...

  4. 【转发】【linux】【ftp】CentOS 7.0安装配置Vsftp服务器

    adduser -d /var/www/android -g ftp -s /sbin/nologin ftp2 一.配置防火墙,开启FTP服务器需要的端口 CentOS 7.0默认使用的是firew ...

  5. CentOS 7.2安装配置Vsftp服务器

    一.配置防火墙,开启FTP服务器需要的端口 CentOS 7.2默认使用的是firewall作为防火墙,这里改为iptables防火墙. 1.关闭firewall: systemctl stop fi ...

  6. CentOS安装配置Git服务器(gitosis)

    主要参考: http://blog.csdn.net/dengjianqiang2011/article/details/9260435 辅助参考: http://freeloda.blog.51ct ...

  7. Linux(Centos)安装配置SVN服务器

    1. 安装SVN服务器: 检查是否已安装 # rpm -qa subversion 安装SVN服务器 # yum install httpd httpd-devel subversion mod_da ...

  8. CentOS安装配置radius服务器

    1.安装 Yum install -y freeradius freeradius-mysql freeradius-utils 2.配置 1)修改 clients.conf # vi /usr/lo ...

  9. 阿里云服务器Linux CentOS安装配置(零)目录

    阿里云服务器Linux CentOS安装配置(零)目录 阿里云服务器Linux CentOS安装配置(一)购买阿里云服务器 阿里云服务器Linux CentOS安装配置(二)yum安装svn 阿里云服 ...

随机推荐

  1. Vue.js 和 MVVM 小细节

    MVVM 是Model-View-ViewModel 的缩写,它是一种基于前端开发的架构模式,其核心是提供对View 和 ViewModel 的双向数据绑定,这使得ViewModel 的状态改变可以自 ...

  2. jquery编写插件的方法

     版权声明:作者原创,转载请注明出处! 编写插件的两种方式: 1.类级别开发插件(1%) 2.对象级别开发(99%) 类级别的静态开发就是给jquery添加静态方法,三种方式 1.添加新的全局函数 2 ...

  3. 解决Eclipse中文乱码 - 技术博客 - 51CTO技术博客 http://hsj69106.blog.51cto.com/1017401/595598/

    解决Eclipse中文乱码 - 技术博客 - 51CTO技术博客  http://hsj69106.blog.51cto.com/1017401/595598/

  4. Windows Server 2003 IIS支持ASP

    1.ASP支持是很简单的  这里简单的说一下 2.安装IIS服务   这里就不多演示了  很简单的 3.安装完成后打开IIS的扩展功能 ASP代码测试页为: <% response.write( ...

  5. java实现简单的单点登录

    java实现简单的单点登录 摘要:单点登录(SSO)的技术被越来越广泛地运用到各个领域的软件系统当中.本文从业务的角度分析了单点登录的需求和应用领域:从技术本身的角度分析了单点登录技术的内部机制和实现 ...

  6. 【洛谷2015】【CJOJ1976】二叉苹果树

    题面 Description 有一棵苹果树,如果树枝有分叉,一定是分2叉(就是说没有只有1个儿子的结点)这棵树共有N个结点(叶子点或者树枝分叉点),编号为1-N,树根编号一定是1.我们用一根树枝两端连 ...

  7. SSRS 数据源访问Cube 无法创建订阅的解决方法

    SSRS Report 的数据源可以直接放问SSAS 的Cube. 当报表的数据源设置成下图: 这样设置后,report 能够正常访问 Cube 并打开Report. 但是,如果我们需要添加数据驱动的 ...

  8. Hello World 程序的起源与历史

    这是一个最著名的程序.对每一位程序员来说,这个程序几乎是每一门编程语言中的第一个示例程序.那么,这个著名的程序究竟从何而来呢? 实际上,这个程序的功能只是告知计算机显示 Hello World 这句话 ...

  9. eclipse中跳转到其它函数方法后如何快速返回原处

    快捷键 ctrl + 鼠标左键:跳转到引用的方法 alt + left :从所跳转到引用的方法返回原方法 alt + right:从原处返回到引用的方法

  10. Eclipse+Maven环境下java.lang.OutOfMemoryError: PermGen space及其解决方法

    转自  https://blog.csdn.net/qdgengwenfei/article/details/71455432 java.lang.OutOfMemoryError: PermGen ...